Our Global Code of Business Conduct serves to guide the behaviors, decisions and actions of our employees consistent with our Company values. The Code helps our people do the right thing and play by the rules wherever we operate around the world.
For urgent matters about Wholesalers 25*32*7 Non-standard Bearing 25*32*7mm , please contact the appropriate office via phone.
25*32*7 non-standard bearing 25*32*7mm
Inner Diameter (ID):25mm
Outer diameter (OD):32 mm
Width/Height: 7 mm
Number of Row: Double row or Single row
Seals type: open or seal
Characteristics: high speed
Material: No mark:Steel ball(SUJ2); SN24:Ceramic ball(Si3N4)
TYN:polyamide resin cage
TR : Phenolic resin cage
BRASS:Brass cage or steel cage
The main technical indicators:
1. The bearing precision index: more than GB / 307.1 94 P4 level precision
2. High speed performance indicators: dmN value 1.3 ~ 1.3 x 106 / min
3. The service life (on average) : > 1500 h
High speed precision angular contact ball bearing service life had a lot to do with the installation, the following should be paid attention to
1. The bearing installation should be clean, clean room, bearing should be carefully selected, bearing with baffle passes through grinding, and in keeping the baffle on inner and outer contour under the premise of baffle parallelism should be controlled below 1 um.
2. Bearing should be cleaned before installed and when cleaning inner ring ramp up, flexible hand induction, no stagnation, air-dried, into the specified amount oil, if oil mist lubrication oil should be in a small amount of oil mist;
3. The bearing installation should use specialized tools, force uniform, do not knock;
4. Bearing deposit should be clean and ventilated, non-corrosive gas, relative humidity is not more than 65%, long-term storage should be rust on a regular basis.
NOTE: Due to a backlog in our technical support department and our continuous effort to improve our customers’ experience, please refer to your nearest distributor with any technical questions. You can locate the nearest Wholesalers 25*32*7 Non-standard Bearing 25*32*7mm distributor by following the link below. Thank you for your understanding.
Wholesalers 25*32*7 Non-standard Bearing 25*32*7mm
|Product Model: || |
|Structure: ||deep groove ball bearing |
|Inside Diameter: ||25 mm |
|Outside Diameter: ||32 mm |
|Thickness: ||7 mm |
|Seals Type: ||zz 2RS |
|Material: ||Ceramic , stainless steel, bearing steel |
|Precision Rating: ||p2 p4 p5 p6 p0 |
|: ||GBZHB or OEM |
|Weight: ||1 KG |
|Payment term: ||TT/LC/Paypal |
|Delivery time: ||IN STOCK |
Bearing Wholesalers is located in 50 countries around the world supporting 139 divisions with 309 manufacturing locations.
Bearing Wholesalers's unrivalled industrial distribution network extends to approximately 13,000 locations globally. Through this extensive network of local, independent
businesses, Bearing Wholesalers brings its products and services to customers in 104 countries. This includes continued penetration of theBearing Wholesalers network of industrial retail outlets, which has more than 3,000 locations around the world.